|Feeding width:||914 mm / 940mm|
|Effective cover width (EW):||762 mm|
|Rib height:||24 mm|
|Coating class:||AZ 150|
|Recommended total coated thickness:||0.47mm , 0.40 mm, 0.35mm, 0.30mm, 0.20mm|
|Colour range:||Non- colour and Colourbonded steel (refer the colour Card)|
|Maximum transportable length:||24ft Reguler Roofing sheets – 18 ft Tile Profile|
Cross Section `Leland Regular Type Roofing
|Base metal thickness (mm)||Total coated thickness (mm)||Mass/area kg/m²||Effective sheet cover width (mm)||Nominal sheet depth (mm)||Minimum recommended roof slope||Maximum recommended supports spacing for normal conditions|
Internal span – 1700 mm
End span – 1000 mmWalls :
Internal span – 2400 mm
End span – 1200 mm
Fasteners/screws complementing the roofing/cladding range
The fasteners/roofing screws selected for roofing and cladding material should have similar life expectancy to that of the roofing /cladding.
We supply a special galvanized delta coated screw with the rubber washer for both steel and timber frames.
Recommended screws specifications – 55 mm Electrogalvanized Screws.